大学英语词汇短语释义解析及例句 coolant flow


释义：

coolant flow 冷却液流; 冷却剂流动：指冷却剂在发动机、设备或系统中流动的过程，以帮助散热，保持适当的工作温度。
· The coolant flow is essential for maintaining the engine's temperature within the optimal range.
冷却剂流动对于保持发动机温度在最佳范围内至关重要。

例句：



Balance coolant flow.

平衡冷却液流动。



The numerical model treats the hot gas flow and coolant flow as one dimensional.

燃气流与冷却水流采用一维流动模型计算。



The temperature rise in the coolant then becomes a function of coolant flow rate.

首先是冷却剂的温度升高，然后温度随冷却剂流动速率变化。



The results show that the coolant flow field distribution is suitable for cooling the engine.

结果表明，发动机缸头冷却水流场分布是合理的，有利于发动机的冷却。



Not wanting that to ever happen again, most operators run full coolant flow to the feed throat.

不希望再次出现这种情况，许多操作者就把喂料口的冷却水打满。



Numerical simulations were used to assess the effect of a conjugate heat transfer and internal coolant flow on film cooling.

本文通过数值模拟的方法同时考虑了耦合传热和冷却流通道流动对气膜冷却的影响。



Numerical simulations of the transpiration cooling thruster with a four-section porous wall show that the design reduces of the required coolant flow by half.

对分四段结构喷管的数值模拟的结果表明，相比不分段而言分段结构可减少一半冷却剂流量。



In this article, the main influencing factors on condensation heat transfer include air flow rate, coolant flow rate, coolant inlet temperature and mixed gas velocity.

在本课题中，影响传热过程的因素主要有空气含量、冷却水流量、冷却水温度及混合气气速。



The theoretical calculation has a good agreement with the test result in a 400MW hydro-generator. Many factors that effect coolant flow and heat exchange was analyzed.

通过400MW水轮发电机空心导线的实验数据，验证了计算程序的正确性，分析了各因素对介质流动和换热的影响。



The bigger the coolant flow is, the more slowly the reactant temperature rises and the shorter the temperature balance time is and the smaller the temperature increment is.

结果表明，冷却介质流量越大，反应介质温度上升越缓慢，达到温度平衡所需时间越短，温度增量越小。



This paper points out that the thermal and ablative problems of the shield can be solved solely with the coolant flow only under one-dimensional incompressible or steady condition.

在冷却剂渗流是一维不可压缩的（或一维定常的）条件下，热层的传热和烧蚀问题可以单独求解。



The influences of the aspect ratio and wall roughness on the coolant flow characteristics, which mainly involve pressure loss, secondary flow and turbulence intensity, were investigated.

研究了高宽比和壁面粗糙度对压力损失、二次流动和紊流强度的影响。



That is not as easy as it sounds, because the only control typically supplied by the machine builder is a coolant flow valve, and often that valve is not designed for accurate flow control.

这可不像听起来那么容易，因为设备制造者在这方面的唯一控制就是冷却水阀，而且这种阀控制常常涉及得不够精确。



The results show that heaving has less effect upon the primary Loop's coolant flow rate and PWR output power in case of forced circulation but strongly influences natural circulation ability.

结果表明：起伏对强制循环下一回路冷却剂的流量和反应堆输出功率的影响较小，而对自然循环能力的影响很大。



Some factors influencing ICP system stability are examined in this paper. These factors are R. F. power, coolant flow, sample introduction etc. The methods to diagnose and reduce drift are proposed.

对影响电感耦合等离子体系统稳定性的射频功率、氩气流速、进样条件等因素进行了考察，提出了判断和减小ICP 系统漂移的方法。