CHAI WAN, Hong Kong -- In a GPON network, terminals can be controlled by optical network terminal management and control interface (OMCI). Carriers allow users to install ONTs in service provisioning to lower ONT installation costs and improve efficiency. Installing ONTs by users meets the following:
l If the ONT is authenticated by password the first time, after the SN is recorded, the ONT then is authenticated by SN.
l The ONT must be installed within 72 hours after services are being applied.
In this case, how to configure the ONT registration mode?
The following command can be run in GPON mode to configure the ONT registration mode.
huawei(config)#interface gpon 0/5
huawei(config-if-gpon-0/5)#ont add
{ portid<U><0,15> }:0
{ loid-auth<K>|ontid<U><0,127>|password-auth<K>|protect-side<K>|sn-auth<K> }:1
{ loid-auth<K>|password-auth<K>|protect-side<K>|sn-auth<K> }:password-auth
{ hex<K>|password-value<S><Length 1-10> }:hex
{ password-value<S><Length 1-20> }:00000000000000001234
{ always-on<K>|once-on<K>|password-value<S><Length 1-10> }:once-on
{ aging-time<K>|no-aging<K> }:aging-time
{ time-out<U><1,168> }:72
{ omci<K>|re-register-auth-mode<K>|snmp<K> }:re-register-auth-mode
{ sn-password<K>|sn<K> }:sn
{ omci<K>|snmp<K> }:omci
{ <cr>|desc<K>|ont-lineprofile-id<K>|ont-lineprofile-name<K>|ont-srvprofile-id<K>|ont-srvprofile-name<K> }:ont-lineprofile-name
{ profile-name<S><Length 1-32> }:ONT
{ <cr>|desc<K>|ont-srvprofile-id<K>|ont-srvprofile-name<K> }:ont-srvprofile-name
{ profile-name<S><Length 1-32> }:ONT
{ <cr>|desc<K> }:
http://www.huanetwork.com/gpon-epon-terminal-price_c42
The command indicates that a user under ONT 1 is added to GPON port 0. The ONT is authenticated by password the first time and the password is 00000000000000001234 in hexadecimal notation. After the ONT goes online, it is registered by SN that is automatically recorded after the first going online. The OMCI protocol is used and the ONT service profile and line profile are used.
The more information about technical support you can consult with our technician - Bill, and his e-mail address is as below:
bill@huanetwork.com (mailto:bill@huanetwork.com)
For customers interested in Huawei networking products, Our supplier’s lab - Huanetwork Lab(www.huanetwork.com) welcome to you to do the remote test, customers can do below test:
1, FTTx System Test
2, ADSL2+ System Test
3, Campus LAN/WAN Test
4, Optical Transceiver Test
5, Network Management Test
6, Compatible Test
7, Software Upgrade Test
8, Products Test
And in our Huanetwork Lab, we have below products ready for test:
Huawei OLT Optical Line Terminal MA5600T Series
Huawei MDU Multiple Dwelling Unit MA5620
Huawei ONT Optical Network Terminal HG8245A, HG8245, HG8010H
Huawei DSLAM MA5616
Huawei AC-DC Power Converter System EPS30-4815AF
Huawei Optical Splitter 1:32
Huawei X700 Series GE Switch S5700-28C-EI with 10G Uplink Module
Huawei X700 Series Access Layer Switch S2700-9TP-EI-AC
Huawei X300 Series Layer 3 Full Optical DC Switch S3328TP-EI-24S-DC
Huawei SFP, SFP+, XFP Module, GPON B+ C+ Module
Huawei Routers AR1200 Series
Huawei U2000 Network Management System
Huawei eSight Network Management System
For customers interested in Huanetwork products, please feel free to contact your sales request for test arrangement. Kindly note, Huanetwork Lab is not open to public, it is just available for Huanetwork customers. Huanetwork reserve the right to reject any test/login requirement.
Contact
huanetwork
jkemma990@gmail.com
