Japan - The imported bearing such as skf bearings is one kind of precision mechanical components. The high standard protection requirements and long distances shipping process have made the deposit and custody requirements for bearing such as nsk bearings become very strict. For example, the factory must control the temperature and relative humidity of the storage chamber to prevent too much changing of the temperature. So regardless of the temperature, humidity and packaging, these factors are all performed in accordance with regulatory requirements. But, some people would ask the problem that what are the perfectly standards for the storage of the bearings such as fag bearings.Today, the most professional producer and seller for imported bearings such as koyo bearings and ina bearings, which website is http://www.hk-nkf.com/ would tell the factory technician all of the information about this. Please kindly read them below.

The first area is related with the requirements about the storage room. First, the environment of the storage room should be clean and dry. The factory should take some measurements to prevent air flowing. If the relative humidity storage chamber for bearings such as skf bearings is greater than 75 percent, the room should be equipped with air-conditioned. However, we should prevent vibration. On the other hand, keeping the constant temperature which changing should not be greater than 3 degree within 48 hours is necessary.

Before the bearing out of the factory, they would all be coated with anti-rusty oil. So, the changing of the temperature would lead to rust oil deterioration. In that case, the room temperature should be controlled between 0 to 25 degrees. The last point the factory employee should take into careful consideration is that the bearings such as fag bearings shoud have regularly checking. If it could be found rusting phenomenon, the oil seal packaging should be remade.

The most crucial point the bearing supplier should consider is for the temperature and humidity of the storage room for bearings. As long as the relative humidity of the warehouse does not exceed 60 percent, the bearings can be a good long-term preservation in their original packaging. The exposed surface would not occur rust and corrosion as they are reserved into the room which humidity is less than 50 percent. If the humidity has been increased, the likelihood of the corrosion for bearings such as skf bearings would also be increased especially the air relative humidity is greater than 75 percent.

Meanwhile, there are also many other kinds of reasons which could cause the rusty and corrosion of the bearings such as FAG bearings. If bearing factory want to have more information about this information, the website hk-nkf.com would be the best choice.

Contact:
URL: http://www.hk-nkf.com/