Multi crop thresher machine https://www.shellermachine.com/multi-crop-thresher-machine is productive farm equipment that threshes grain and removes the seeds from the stalks and husks. The farm machine used to separate the wheat, maize, soybean, peans and other small grains and seed crops from their chaff and straw. The machine loaded with advanced components and modern features, which helps in farming applications. Since the thresher machine came, it changed the threshing process, making it effortless and extra labour free.

Before the thresher machine was developed, the threshing process was done by hands with flails which were very time consuming and laborious. Later, in 1786 the first threshing machine invented by Scottish engineer Andrew Meikle, which removed a significant amount of hard work from farm labour. In the 19th century, reaper-binders, mechanical reapers, and threshers gradually widespread, resulting in grains produced much less laboriously.

The corn sheller https://www.shellermachine.com/ is rugged and made with advanced technology that improves the machine’s working ability. The thresher machines have become quite famous in the country in the last 2-decades. In India, the machine was first introduced during 1956-57, called Ludhiana Thresher. The thresher was tractor driven and mainly used for wheat. The machine was very good at working as it threshed, bagged, and cleared the grains at the same time. Later, in 1965, by viewing the low horsepower thresher needed, the low hp threshers were invented. The spike tooth cylinders thrashers introduced in the country around 1970. These machines had simple designs, and maintenance was inadequate because the machine’s total weight was less.

The thresher machine greatly used for threshing, harvesting operations. There are 3-steps process:-

First Step
In the first step, putting the bunch of straw and grains into the feeder. The feeder controls the feed rate to prevent overloading into the machine.

Second Step
The rapidly rotating set of blades, called the separator. The separator first tore the bundles apart, breaking the twine, and snapping the heads from the straw after beating the straw and heads onto a grooved plate, kneeling them without crushing them. Then the straw passed over a straw rake to remove most of the straw from the kernels.

Third Step
In the last step, the cleaner kernels passed through the last screen were moved over an air stream that blew off the remaining chaff and straw away. The clean or pure grains fell into a feeder where a measuring device measured kernels, and later it blew out onto a straw stack by a larger, stronger blower.