ODENSE, Denmark - April 3, 2020 - With electrical current installed in a vehicle, more jobs can be done on-site, even when no mains electricity is connected and service work can be done quickly and easily.

Reliable 12V and 230V in the vehicle anytime
With a 12 and 230 voltage LPS, Lithium Power Supply, you get a lithium battery-based power supply for your power tools and battery chargers, as well as an installation of DC equipment, such as marker lights, work lights, and cabin heaters.

Rapid charging from the vehicle while driving removes need for idling
The LPS is charged automatically while driving, or directly from the mains – and can be used without expensive and environmentally damaging engine idling. By swapping your traditional battery system for an LPS, idle running is no longer necessary. Although some additional consumption is required, the end result is still a CO2 reduction of at least 75% compared to engine idling.

All-in-one inverter system
The LPS 2500W for use in a commercial vehicle includes a 1 kWh lithium battery, 230V inverter (pure sine wave) with up to 5000W in peak, charger for the grid, DC-DC converter for fast charging from the vehicle while driving and several relays for safe handling.

Built-in start aid
If the vehicle's battery is flat, start assistance can be activated from the display, putting you quickly on the move again.

More than 50 kg (110 lb) in weight reduction
The LPS 2500W achieves at least a weight reduction of 50 kg compared to a traditional inverter system with lead batteries. This is equivalent to the same usable amount of energy from at least two 100A, heavy lead batteries.

For more information about 230V in the vehicle with an all-in-one inverter system, please visit Clayton Power's website: www.claytonpower.com


Read this article in German: 230V im Fahrzeug or in Danish: 230V i bilen.

https://youtu.be/QAO9kIg3bbk

Contact
Clayton Power