ODENSE, Denmark - March 27, 2020 - "An LPS power supply is a relatively inexpensive solution," says Lars of "FJ Maskiner". Of course, you need to compare it to the effort and cost of traditional auxiliary power solutions comprising lead batteries, a 220V inverter, a DC-DC charger and block relay.

The LPS supplies both 12V and 220V
"FJ Maskiner" provides service for construction machinery. The work is often carried out where there is no electricity available, therefore, Lars is dependent on being able to supply both 12V and 220V himself. As the LPS power supply supplies both 12V and 220V, it is perfect for the usual requirements. The auxiliary power system is sufficient for all common battery tools as well as 12V for heating, work light, signal light and lighting inside the service vehicle.

We can jump start both 12V and 24V machinery
It happens that customers forget to switch off light or radio and therefore need jump starting assistance. "FJ Maskiner" literally solves the problem in 5 minutes using a Clayton Power DC-DC converter. The DC-DC converter is connected to the LPS. Press the converter button for 5 minutes and the machine or engine will start. We can jump start both 12V and 24V machinery.

Learn more about the all-in-one power supplies for auxiliary power in commercial vehicles from Clayton Power at https://www.claytonpower.com/

https://youtu.be/Maq6vLLCCks

Contact
Clayton Power